AMSOIL High Tack
Foam Filter Oil
AMSOIL Foam Filter Oil has long
provided users of AMSOIL air filters with a high level of air flow
and superior particle removal. Now, five years of research,
testing and development have yielded a new and improved Foam
Filter Oil formulation. New AMSOIL High Tack Foam Filter Oil is a
special blend of synthetic polymers that allows maximum air flow
and increased particle removing efficiency and capacity. High Tack
Foam Filter Oil stays in place throughout service life, resists
washout from carburetor fogging and will not plug foam filter
cells, while its new red color helps ensure even oil coverage
across the entire filter.
AMSOIL High Tack Foam Filter Oil was tested with
AMSOIL 2-Stage Foam Filter media under the SAE J726 test
methodology, yielding an efficiency rating of 99.5 percent. High
particle removing efficiency is critical in preventing engine
wear, keeping equipment running at peak efficiency and improving
fuel efficiency.
AMSOIL High Tack Foam Filter Oil is available in
its traditional form and a new and convenient aerosol spray.
Because it offers users quick and convenient application, the new
spray formulation is a boon for power sports enthusiasts.
See Pricing Information or Place an Order
Package sizes include:
8-oz. Bottle
8-oz. Bottles (case of 6)
11-oz. Spray Can
11-oz. Spray Cans (case of 6)
Applying High Tack Foam Filter Oil
For best performance, apply a generous amount of High Tack Foam
Filter Oil and work it into the foam media. Squeeze out excess
oil, leaving a uniformly oiled filter.
A properly oiled filter will feel oily or tacky
to the touch on both the outer and inner surfaces, but should not
be dripping oil.
When reinstalling the air filter, apply a thin
film of AMSOIL Multi-Purpose Grease on the foam base to insure a
leak free seal between the filter and housing. |
