|
AMS-Oiler™ high-tech oil pre-charger
|
|
AMS-Oiler™ Approximate Dimensions
|
|
AMK-01 |
7.40 x 2.50
x 2.50 inches |
|
AMK-02 |
7.90 x 2.50
x 2.50 inches |
|
Download dimension diagrams |
End Dry Starts with the
AMS-Oiler™
The needs of automotive and industrial equipment
have continued to place increasing demands on the lubrication
industry. Over the years, AMSOIL research and development has
responded to changes in the industry by developing products that
keep AMSOIL on the cutting edge. The new AMS-Oiler™ is the most
recent example in a long line of top-quality innovations from
AMSOIL.
Independent studies have concluded that engine
wear during start-up is a major concern. Even though engine
components remain dry for only a short period of time at ignition,
when this circumstance is multiplied by the 400 to 600 dry starts
a year by the average motorist, the potential for harmful
metal-on-metal contact and significant wear is great.
The AMS-Oiler™ is an oil pre-charger that puts
an end to dry-engine starting. Typically, an engine that sits idle
for even a short period of time will operate relatively dry upon
starting before oil is able to fully lubricate the system. In
fact, the automotive industry estimates that up to 50 percent of
engine bearing wear occurs during the starting process. Indeed,
the superiority of AMSOIL motor oils minimizes start-up wear by
clinging to the metal surfaces, but even more can be done to
concentrate the oil on the critical wear areas in an engine. With
the AMS-Oiler in place, 160 cubic centimeters of oil is injected
directly on the engine bearings and other wear sensitive surfaces
upon turning of the key, giving instant protection to vital
engine components.
AMK-02
"stand-alone" configuration
The AMS-Oiler™ outperforms gas and air charge
systems. When the ignition key is turned to the on position, an
audible alarm sounds while a 12-volt DC solenoid initiates the
AMS-Oiler's operation. When the oil delivery process is complete,
the alarm ceases and the operator can start the engine. The engine
can be started at any time without damage to the AMS-Oiler™,
however, the AMS-Oiler™ is recharged by the pressure generated by
the engine's oil pump. Complete recharge is accomplished within 40
seconds. The absence of a gas or air charge eliminates the
possibility of cross-contamination of dirty gas or air with the
engine oil, keeping the oil pure and performing optimally. The
design of the AMS-Oiler™ reservoir also protects the unit from
ambient temperature fluctuations.
Specially crafted by AMSOIL technicians, the
AMS-Oiler™ is the culmination of extensive research and
development. “Our products are exceptional when it comes to
reducing wear during operation,” said Technical Director Dave
Anderson. “The weakest link in the chain, however, was still
during startup. With the AMS-Oiler™, we’re closing that last gap.”
With an extremely rugged chrome plated hi-grade
carbon steel reservoir and anodized aluminum base, the AMS-Oiler™
is crafted to withstand severe service and to perform reliably in
any personal, commercial or industrial application.
Unlike other pre-charger systems, the AMS-Oiler™
has no bulky moving parts which need maintenance and does not rely
on pressurized gas to function. The AMS-Oiler™ is a self
contained, streamlined unit that has a mechanical life cycle
exceeding one million engine starts, with no maintenance required.
The AMS-Oiler™ is self-lubricating with an integrated overpressure
protection device that protects units from retaining pressures in
excess of 90 p.s.i.
AMK-01 "bolt
on" configuration
In order to meet consumers’ needs, AMSOIL has
designed two AMS-Oiler™ models to cover all applications. The
first model, AMK01, is crafted to attach directly to the AMSOIL
Dual-Remote By-Pass Filtration Systems BMK13, 15 through 18. The
second model, AMK02, is designed as a stand-alone system. AMK01
and AMK02 are designed for pre-oiling engines up to 500 CID (cubic
inch displacement)(8.2L). The AMS-Oiler™ retro-fit applicability
to the AMSOIL By-Pass filtration systems provides a convenient
perch for quick installation. The stand-alone AMS-Oiler™ mounts
easily at any angle to accommodate virtually every engine. The
AMS-Oiler™ kit comes with all of the necessary components to
complete installation.
With the new AMS-Oiler™, AMSOIL continues to
make lubrication history, with quality still the number one
priority.
PRODUCT MODELS
AMK01, the “bolt
on” configuration, is designed for use in combination with the
BMK13, 15 through 18 Series Dual Remote Mount Filtration Systems.
AMK02 is a “stand-alone” configuration designed for
universal application. The AMK02 can be used with any engine
application and mounts at any angle.
AMS-Oiler™ Benefits
- Eliminates dry starts, reduces engine wear
- Retrofit with Dual Remote Filtration System
- Compact design, mounts at every angle
- Ideally suited for gas & diesel applications
- Capacity to pre-lube up to 500 CID (8.2L)
engines
- Promotes easier starts in extreme cold
weather
- Closed system prevents contamination
- Self Lubricating, no maintenance required
- Operational cycle life exceeds 1,000,000
engine starts
- Install and forget
AMS-Oiler™ Market Applications
While every engine can benefit from the
use of an AMS-Oiler™, vehicles especially prone to frequent
starting and engines that sit idle for extended periods of time
would extend their engine life with the simple addition of an
AMS-Oiler™. An AMS-Oiler™ can provide the instant lubrication
necessary to save these engines significant wear and prevent
damaging metal-on-metal contact.
- Taxicabs
- Delivery Fleets
- Marine Applications
- Service Vehicles
- Family Vehicles
- Personal Vehicles
- Construction Equipment
- Farm Equipment
- Hobby / Collector / Competition Cars
- Emergency Generators and Pumps
- Tow Vehicles
- Motor Homes
- Cold Weather Application
|
