• Saber Outboard is a very low smoke, low odor product
• At 100:1, produces lower emissions than oils mixed at 50:1
• One mix ratio for everything eliminates confusion
• Versatile and very good for many applications
• Cost effective compared to oils mixed at 50:1 or richer
• Saber Outboard exhibits low aquatic toxicity
• Lean mix ratios inhibit plug fouling and exhaust port deposits

Product Description
AMSOIL Saber Outboard (ATO) Synthetic 100:1 Pre-Mix 2-Cycle Oil is formulated with exclusive AMSOIL synthetic base oils and premium additives. Designed for lean mix ratios in two-cycle outboard motors, Saber Oil has excellent lubricity and cleanliness properties that control friction, wear, plug fouling, ring sticking and exhaust port blocking. AMSOIL Synthetic 100:1 2-Cycle Oil has been protecting and providing improved performance in two-cycle motors since 1973.

Saber Outboard
Saber Outboard (ATO) is specifically designed for outboard motors. It is also very good for personal watercraft, jet boats, motorcycles, snowmobiles and ATVs. Saber Outboard contains a heavy dose of lower temperature dispersant additives that excel at preventing varnish and deposits from forming in water-cooled motors. Saber Outboard is a very low smoke, low odor, low toxicity product that produces lower emissions at 100:1 mix ratios than oils mixed at 50:1. It is ideal for trolling motors as lean mix ratios reduce “oil loading” and plug fouling for rapid throttle response. Operators and the environment benefit from the use of Saber Outboard. It is recommended for pre-mix use where TC-W3 or API TC is specified.

Applications (see Two-Cycle Recommendations Chart)
AMSOIL Saber 100:1 2-Cycle Oil is recommended for 100:1 mix ratios in normal service. Richer mix ratios may be used where desired.

TYPICAL TECHNICAL PROPERTIES Saber Outboard Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATO)
Kinematic Viscosity @ 100°C, cSt (ASTM D-445)	17.9
Kinematic Viscosity @ 40°C, cSt (ASTM D-445)	141.2
Viscosity Index (ASTM D-2270)	141
Pour Point °C (°F) (ASTM D 97)	-33 (-27)
Flash Point °C (°F) (ASTM D 92)	120 (248)
Fire Point °C (°F) (ASTM D 92)	138 (280)
DANGER: harmful or fatal if swallowed. Contains synthetic lubricant and petroleum distillates. If swallowed do not induce vomiting. Contact a physician immediately. Keep away from fire, heat and open flame. Use with adequate ventilation. Avoid frequent or prolonged skin contact. Flush eyes with water for 15 minutes in case of contact. KEEP OUT OF REACH OF CHILDREN.